MJJC Foam Cannon Pro V2.0 (Thicker Snow Foam Technology) with 1/4 Inch Quick Connector for Pressure Washer, 40 oz Bottle (Pro V2.0 (1/4″ Quick Connector))

Description

Foam Cannon Pro and Foam Cannon S are new generation Foam Cannons, powered by MJJC’s new generation foam technology. This new technology is stronger and creates more, thicker foam with less soap, even with smaller pressure washers. They’ve a better connection system. This permits them to attach to your pressure washer easily, and makes changing attachments easier and faster. Simply put, they’re better, stronger, and save you soap, at the same time as creating more foam, making it easier and quicker to foam your vehicle.

MJJC Foam Cannon Pro V2.0. Equipped with Thicker Snow Foam Technology, it makes an even thicker, creamy foam like shaving foam. Built with new generation construction, making it stronger and more robust.
1/4 Inch Quick Connector Adapter included. May also be attached to “Karcher PS Series” that adopts 1/4 Inch Quick Connect. (K1700, K1700 Cube, K1800PS, K1800PS Cube, K1900PS, K2100PS, K2300PS) Cannot be connected to Karcher K2, K3, K4, K5, or K7.
✅ Features – (1)Larger Tank (more than 1200ml) increases foam production. (2)Built with new generation construction, making it stronger and more robust. (3)Produces 30% denser foam than the classic foam cannon, at the same time as the usage of as low as 100ml of shampoo per 900ml water(1:9 ratio). That means you’ll create more foam at the same time as the usage of less shampoo. (4)Thick foam May also be produced even with 90Bar(1300psi) pressure washers. (5)New connection system makes it easier to attach fittings, no need for PTFE tape or glue. (6)Has all of the features of the Foam Cannon Classic and Foam Cannon S.
Operating pressure range: 1300 psi to 3600 psi; please use different orifice nozzles depending on the pressure performance of the high-pressure cleaner. (The higher the pressure, the larger diameter orifice nozzle required.) 1.25mm orifice nozzle (1600-2200psi) is pre-connected to the main body.
If the pressure of the high-pressure cleaner is 1300-1600 psi, replace the nozzle with the included 1.1 mm orifice nozzle. If the usage of with the high-pressure cleaner at 2200 psi or higher, replace with a 1.35mm or larger orifice nozzle (sold one after the other).